Compressor

EMAX ESP10D240V3: The flagship of the dual-pump series, this 3-phase 240-gallon unit offers the highest storage capacity and performance for heavy-duty industrial automation. - Motor Specs: 10.0 HP 3-Phase - Flow Capacity: 962 L/min (34 CFM @ 100 PSI) - Force Rating: 175 PSI (12 Bar) - Cylinder Siz

ESP10D120V3

$8,169.99

The ESP10D120V3 is designed for high-demand industrial environments where multiple pneumatic tools operate simultaneously. Compared to single-phase Silent Air models, the 3-phase configuration provides: - Smoother power delivery and higher efficiency - Better performance under continuous load - Red

ESP10A120V1

$8,435.99

The ESP10A120V1 is designed for high-demand shops where airflow stability and reduced noise are equally important. Compared to 80-gallon versions, the key advantage is its larger air reservoir, which provides: - Longer tool runtime before compressor restart - Reduced cycling frequency (less wear on

ESP10A080V1

$8,976.99

The ESP10A080V1 is designed for high-output workshop environments where noise control matters. Compared to standard 10 HP compressors, its key advantage is not only airflow but also: - Much lower intake noise (the loudest part of piston compressors) - Stable high-volume airflow (~38 CFM class) - Re

ESP05V080I1PK

$3,001.99

The ESP05V080I1PK is designed for quiet, stable, and clean compressed air delivery in professional environments. Typical applications: - Automotive workshops - Tire and detailing shops - Small fabrication facilities - Paint and finishing systems - Light industrial maintenance - Shops requiring qui

ES10V080V1

$2,583.99

The ES10V080V1 is designed for high-output shop environments where noise reduction is important. Compared to standard 10 HP piston compressors, it offers: - Much lower perceived noise (intake silencing system) - Stable airflow for multiple pneumatic tools - Reduced vibration due to low-RPM pump ope

ERIK150003

$13,964.99

The ERIK150003 is designed for continuous industrial air demand, where piston compressors would fail due to cycling limits and heat buildup. The rotary screw system provides: - Constant airflow without pressure dips - No start/stop cycling (reduces wear significantly) - High efficiency at long runt

ERI0050801

$5,699.99

The ERI0050801 is designed for constant air demand environments, where piston compressors would normally cycle on and off. Instead, the rotary screw system: - Produces steady, non-pulsating airflow - Eliminates frequent start/stop cycling - Reduces mechanical wear and heat stress - Improves efficie

ERI0050001

$4,369.99

The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing: - Stable airflow without pressure spikes - Lower noise compared to reciprocatin

EI07V080V1

$3,941.99

The EI07V080V1 is built for serious shop air demand, offering significantly higher airflow than typical 7.5 HP compressors. Its strength comes from: - High airflow (~31 CFM) suitable for multiple pneumatic tools - Two-stage compression for improved efficiency and cooler operation - Pressure-lubrica

EGES24120T

$6,174.99

The EGES24120T is designed for high-demand jobsite air systems, capable of running multiple pneumatic tools simultaneously. Its major advantage is the combination of: - Very high airflow (near 60 CFM class) - Large 120-gallon storage buffer - Gas engine independence (no electrical supply required)

EGES1860ST

$7,599.99

The EGES1860ST is built for serious mobile air demand, especially where multiple pneumatic tools must run simultaneously. Its high CFM output allows it to support: - Framing nailers and roofing tools - Impact wrenches and air ratchets - Light sandblasting setups - Industrial maintenance tools in th

DXCMV7518075

$2,127.99

The DXCMV7518075 is designed for serious workshop air demand, bridging the gap between small shop compressors and full industrial screw systems. Its performance strengths include: - Stable airflow for multiple pneumatic tools at once - High-pressure storage (175 PSI) for longer tool runtime - Lowe

DXCMV5048055.1

$1,595.99

The DXCMV5048055.1 is designed for serious shop workloads, not light DIY use. Its combination of high CFM output and large air storage capacity allows it to: - Run multiple pneumatic tools at the same time - Maintain stable pressure under intermittent heavy load - Reduce compressor cycling due to l

DXCMV5018055

$2,516.99

The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps: - Reduce pressure drops during too

DXCMTA1980854.SAN

$599.99

Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain. - Drive Strength: 1.9 HP Electric Motor - Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI) - Pressure Peak: 150 PS

DXCMLA4708065

$1,215.99

The DXCMLA4708065 is designed for steady, continuous shop air supply rather than peak portable performance. Its strength lies in its large tank capacity combined with a low-RPM cast iron pump, which allows it to: - Maintain stable pressure during tool use - Reduce compressor cycling frequency - Sup

DXCMH1393075

$2,293.99

The DXCMH1393075 is designed for field operations where electrical power is unavailable or impractical. Its main strength is high airflow in a portable gas-driven platform, allowing it to run multiple pneumatic tools at the same time. Key performance characteristics: - Strong airflow for framing,

DXCM602

$637.99

The DXCM602 is built around a high-pressure single-stage system, which gives it a key advantage: it stores more usable air in the tank compared to lower-pressure 135 PSI compressors. This helps reduce compressor cycling and improves tool runtime between refills. However, its real performance streng

DXCM271

$379.99

The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means: - Longer tool runtime before the compressor restarts - Faster recovery for small air tools - Better efficiency for intermittent use However, its airflow rating (around 5 SCFM) places it

DXCM201

$730.99

The DXCM201 is designed around a high-pressure 200 PSI system, which gives it a key advantage: it can store more usable air in the tank compared to lower-pressure 20-gallon compressors. This translates into longer tool runtime before the compressor needs to refill. However, its real working strengt

RCP-C7583VS

$2,459.99

Chicago Pneumatic RCP-C7583VS: Industrial 7.5HP vertical system featuring an “Iron Series” pump and 3-phase motor for high-cycle automotive shop environments. - Motor Specs: 7.5 HP 3-Phase - Airflow Volume: 680 L/min (24.0 CFM) - Pressure Peak: 175 PSI (12 Bar) - Tank Orientation: 80 Gallon Vertica

RCP-C1430G

$3,024.99

The Chicago Pneumatic RCP-C1430G gasoline-powered compressor addresses remote industrial field maintenance constraints, leveraging a rugged 14 HP Kohler engine block to preserve high-pressure pneumatic tool paths without facility power drops. - High torque 14 HP Kohler engine. - Steady free air cap

RCP-C1130G

$2,725.99

Chicago Pneumatic RCP-C1130G Air Compressor: Heavy-duty 11HP gasoline unit featuring a Honda GX engine and a cast iron pump, built for extreme durability in mobile service and construction environments. - Engine Specs: 11.0 HP Honda GX340 - Discharge Rate: 524 L/min (18.5 CFM) - Force Rating: 175 P