All products

Everything we make, with free shipping to 29 countries.

The DXCMH1393075 is designed for field operations where electrical power is unavailable or impractical. Its main strength is high airflow in a portable gas-driven platform, allowing it to run multiple pneumatic tools at the same time. Key performance characteristics: - Strong airflow for framing,

DXCM602

$637.99

The DXCM602 is built around a high-pressure single-stage system, which gives it a key advantage: it stores more usable air in the tank compared to lower-pressure 135 PSI compressors. This helps reduce compressor cycling and improves tool runtime between refills. However, its real performance streng

DXCM271

$379.99

The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means: - Longer tool runtime before the compressor restarts - Faster recovery for small air tools - Better efficiency for intermittent use However, its airflow rating (around 5 SCFM) places it

DXCM201

$730.99

The DXCM201 is designed around a high-pressure 200 PSI system, which gives it a key advantage: it can store more usable air in the tank compared to lower-pressure 20-gallon compressors. This translates into longer tool runtime before the compressor needs to refill. However, its real working strengt

RCP-C7583VS

$2,459.99

Chicago Pneumatic RCP-C7583VS: Industrial 7.5HP vertical system featuring an “Iron Series” pump and 3-phase motor for high-cycle automotive shop environments. - Motor Specs: 7.5 HP 3-Phase - Airflow Volume: 680 L/min (24.0 CFM) - Pressure Peak: 175 PSI (12 Bar) - Tank Orientation: 80 Gallon Vertica

RCP-C1430G

$3,024.99

The Chicago Pneumatic RCP-C1430G gasoline-powered compressor addresses remote industrial field maintenance constraints, leveraging a rugged 14 HP Kohler engine block to preserve high-pressure pneumatic tool paths without facility power drops. - High torque 14 HP Kohler engine. - Steady free air cap

RCP-C1130G

$2,725.99

Chicago Pneumatic RCP-C1130G Air Compressor: Heavy-duty 11HP gasoline unit featuring a Honda GX engine and a cast iron pump, built for extreme durability in mobile service and construction environments. - Engine Specs: 11.0 HP Honda GX340 - Discharge Rate: 524 L/min (18.5 CFM) - Force Rating: 175 P

RCP-7581VS

$2,697.99

Chicago Pneumatic RCP-7581VS vertical reciprocating compressor resolves professional garage tool limits, forcing an exceptional volume of continuous high-pressure air through a space-saving footprint to eliminate single-phase circuit line lag. - Supplies steady 25.3 CFM delivery rate. - Space savin

RCP-4961VNS

$1,946.99

Chicago Pneumatic RCP-4961VNS Air Compressor: Efficient 5HP vertical compressor featuring a 60-gallon tank, engineered for small-to-medium automotive shops requiring reliable air in a space-saving footprint. - Drive Strength: 5.0 HP Single-Phase - Flow Performance: 433 L/min (15.3 CFM) - Compressio

RCP-1630G

$5,129.99

Chicago Pneumatic RCP-1630G Air Compressor: High-output 16HP gasoline-powered service truck compressor featuring a Vanguard engine, designed to deliver professional-grade pneumatic power in remote field locations. - Engine Specs: 16.0 HP Briggs & Stratton Vanguard - Pneumatic Supply: 991 L/min (35.

RCP-10123D

$6,017.99

The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows: - Alternating operation to balance wear between pumps - Backup operation if one pump requires maintenance - Improved uptime in busy workshop environments The cas

C583VS4

$2,583.99

The C583VS4 is built around a slow-turning cast iron pump design, which is one of its biggest advantages over standard 5 HP compressors. Instead of pushing high RPM for output, it prioritizes: - Lower operating temperature - Reduced internal wear - Improved air dryness (less condensation buildup) -

VPL15F-12

$6,283.99

The Champion VPL15F-12 is designed for operations that require reliable compressed air in tight installation spaces without sacrificing performance. The vertical tank design reduces floor footprint while still providing strong air storage capacity to stabilize pressure during peak demand. The PL-Se

HR7D-12

$7,827.99

The Champion HR7D-12 is built for environments where consistent airflow and operational redundancy are important. The duplex configuration allows: - Alternating operation to balance wear between pumps - Simultaneous operation during peak air demand - Improved uptime and reduced downtime risk The R

HR30D-24

$24,699.99

The HR30-24 is designed for facilities that need plant-wide compressed air distribution rather than localized shop use. Its R-70 pump platform is optimized for low RPM operation, which improves long-term durability by reducing: - Mechanical stress on bearings and crankshaft - Heat buildup during co

HR25-13

$9,176.99

The Champion HR25-13 platform is designed for facilities requiring stable, high-volume compressed air for multiple simultaneous users. The R-70 pump operates at low RPM, which improves long-term durability by reducing: - Heat buildup - Mechanical wear - Vibration stress - Maintenance frequency

HR20D-25

$18,524.99

The Champion HR20D-25 is designed for facilities where compressed air is a critical utility powering multiple production systems simultaneously. Its duplex configuration provides operational flexibility: - One compressor can handle base load demand - Both compressors operate during peak usage - Bui

HR20-24

$13,489.99

The Champion HR20-24 is designed for medium-to-large industrial facilities requiring dependable compressed air throughout multiple work shifts. The combination of the R-70 compressor pump and large 240-gallon receiver tank helps maintain stable system pressure while reducing compressor cycling. Its

HR20-12

$11,779.99

The Champion HR20-12 is engineered for facilities that require dependable compressed air throughout multiple shifts. Its R-70 compressor pump is specifically designed for larger industrial systems and delivers high airflow while maintaining low operating speeds. This combination helps provide: - Lo

HR15DF-24

$14,154.99

The Champion HR15DF-24 is designed for facilities where compressed air is a critical production utility. Its duplex design provides operational flexibility by allowing one compressor to operate during lower demand periods while automatically bringing the second compressor online during peak usage. T

HR15-12

$6,250.99

The Champion HR15-12 is built for facilities that require reliable compressed air throughout multiple shifts. Its R-40 pump offers greater displacement than standard R-30 models while operating at lower RPM, resulting in: - Lower operating temperatures - Reduced vibration and noise - Extended beari

HPL7DF-12

$8,843.99

The Champion HPL7DF-12 is designed for businesses that require dependable compressed air throughout the workday without sacrificing reliability. The duplex configuration offers operational flexibility by alternating compressor operation during normal usage, reducing wear and extending equipment life

HPL5D-8

$9,784.99

The Champion HPL5D-8 is engineered for businesses that require reliable compressed air without moving to larger industrial compressor systems. The duplex design provides significant operational advantages, including reduced wear through alternating compressor cycles and increased airflow capacity du

HPL30-24

$15,009.99

The HPL30-24 is designed for facilities where compressed air is a critical utility supporting production, automation, and manufacturing processes. Its 101 CFM output at 175 PSI allows it to support: - Multiple CNC machining centers - Automated manufacturing lines - Industrial blast and finishing sy